cadillac Workshop Repair Guides

Cadillac Workshop Service and Repair Manuals

Recall - Air Bag SDM Sealing For Water Intrusion|Page 509 > < Recall - Air Bag SDM Sealing For Water Intrusion|Page 507
Page 1
background image

Air Bag Control Module: Recalls
Parts Information

NOTICE:

IT IS EXTREMELY IMPORTANT THAT ONLY THE SPECIFIED LOCTITE 5140(R) POTTING COMPOUND (SPECIALIZED SEALER) BE
USED TO PERFORM THE SEALING OPERATION ON THE SENSING AND DIAGNOSTIC MODULE. THIS IS THE ONLY MATERIAL
FOUND THAT MEETS THE SEALING REQUIREMENTS FOR THE MODULE.

Important:

Loctite 5140(R) potting compound (specialized sealer), nozzles, and Scotch Brite(R) cleaning pads required to complete this campaign will be
preshipped to involved dealers of record from Helm, Incorporated, at no charge. This pre-shipment will occur the week of September 8, 1998. Each
dealer will receive an initial pre-shipment of 25% of requirements, with a minimum of one kit (containing one tube of potting compound, eight
nozzles, one cleaning pad, and an instruction sheet) per dealer. Each kit will service eight vehicles.

NOTICE:

If additional kits are required, make a photocopy of the order form included in this bulletin, and fax the completed form to Helm Incorporated at
(313) 883-1041. Quantities will be limited to two (2) kits per order (each kit will service eight vehicles). Refer to campaign number 98032.

Recall - Air Bag SDM Sealing For Water Intrusion|Page 509 > < Recall - Air Bag SDM Sealing For Water Intrusion|Page 507