DeVille V8-4.6L VIN 9 (1995)
Suspension Control Module: Service and Repair
Road Sensing Suspension (RSS)
Resistor Module
RSS RESISTER MODULE
Fig. 122 Sensing Resistor Module Replacement.
WARNING: The resistor module is receiving a high amount of current and can get very hot 480° F (250° C). Extreme care should be
taken when replacing or working around the resistor module.
REPLACE
1. Remove luggage compartment trim panel.
2. Disconnect resistor module electrical connector, Fig. 122.
3. Remove resistor module from vehicle.
4. Reverse procedure to install.
Control Module Replacement
ROAD SENSING SUSPENSION (RSS) CONTROL MODULE