DeVille V8-4.6L VIN 9 (1995)
Ride Height Sensor: Description and Operation
ELC HEIGHT SENSOR
DESCRIPTION
The height sensor controls two circuits, compressor relay coil ground circuit and exhaust solenoid coil ground circuit. To prevent energizing the
compressor relay and exhaust solenoid circuits during normal ride motions, the sensor circuit provides a predetermined delay before the ground circuit
is completed. The sensor electronically limits compressor run time and exhaust solenoid energized time. This limit function is necessary to prevent
continuous compressor operation in case of a system leak or continuous exhaust solenoid operation. This timer is reset whenever the ignition is turned
Off and On, or height sensor exhaust or compressor signal changes. The height sensor is mounted to the body frame in the rear of the vehicle. The
sensor actuator arm is attached to the control arm by a short link
