DeVille V8-4.6L VIN 9 (1995)
Power Window Motor: Service and Repair
Front Door
WINDOW SWITCH TRIM PLATE
Front Door Power Window Switch
REMOVE OR DISCONNECT
1. Use a 1/2 inch wide flat bladed tool to pry up on the rear edge of trim plate.
2. Insert the blade 3/4 inch into the door trim to engage retention clip. Press firmly toward switch plate to disengage clip.
3. Pull flat bladed tool upward while pressing firmly toward plate to pull plate from trim panel.
NOTICE: Before lifting switch plate from trim panel, insure that flat bladed tool has fully disengaged retention clip. Otherwise damage to switch
plate or clip may occur.
