DeVille V8-4.6L VIN Y (1998)
9.
Install the seat trim cover. Refer to the appropriate seat trim cover installation procedure in the Seats sub-section of the Service Manual.
10.
Attach the seat back assembly to the seat cushion assembly.
^
Install the hinge bolts.
^
Install the roll pins that retain the reclining actuator to the seat back hinge.
^
Connect the electrical connectors between the seat back and the seat cushion.
11.
Place the seat assembly inside the vehicle and connect the electrical connectors. DO NOT install at this time.
12.
Verify the seat heat function is operational.
13.
Complete the seat assembly installation. Refer to Seat Replacement in the Seats sub-section of the appropriate Service Manual for the installation
procedure.
