DeVille V8-4.6L VIN Y (1998)
8. Remove the bolt boots (1), (2).
9. Remove the caliper.
^
Inspect the inside of the caliper assembly for signs of fluid leakage. Refer to "Brake Caliper Overhaul" if any leakage is detected.
^
Remove the mounting bolt seals if they were used.
10. Remove the bushings.
11. Inspect the mounting bolt and the sleeve assemblies for corrosion. Replace any corroded parts. Do not attempt to polish away any corrosion.
12. Inspect the bolt boots for any nicks, cuts, or corrosion. Replace any damaged parts.
IMPORTANT: Clean the caliper assembly and install a new brake caliper hardware kit. Replace the brake caliper hardware kit with every brake
pad replacement.
INSTALLATION PROCEDURE
1. Install the new bushings and the bolt seals.
2. Lubricate the bushings and the mounting bolt seals.
