DeVille V8-4.6L VIN Y (1998)
Brake Caliper: Service and Repair
Brake Caliper Bracket Overhaul
Overhaul Procedure
1. Remove the caliper anchor bracket.
2. Mount the anchor bracket in a vise.
3. Remove the Pin bolt boots from caliper anchor bracket.
4. Remove the bushings from the anchor bracket mounting bores. Use a screwdriver or punch to bend the bushings inward and extract bushings with
needle nose pliers.
IMPORTANT:
^
All parts in clean, denatured alcohol. Dry with unlubricated compressed air.
^
Inspect the caliper anchor bracket for cracks. If cracked, replace bracket
5. Lubricate and install new bushings into bracket mounting bores.
