DeVille V8-4.6L VIN Y (1998)
Brake Master Cylinder: Description and Operation
This master cylinder is a composite design of a plastic reservoir and aluminum body. Using a diagonally split system of one front and one diagonally
opposite front and rear brake served by a primary piston. The opposite front and rear brakes are served by the secondary piston. It incorporates the
functions of a standard dual master cylinder as well as a fluid level sensor switch and front reservoir access for use with Traction Control.
IMPORTANT:
^
Replace all components included in repair kits used to service this master cylinder.
^
Lubricate rubber parts with clean brake fluid to ease assembly.
^
Do not use lubricated shop air on brake parts as damage too rubber components may result.
^
It may be necessary to bleed all or part of the brake system if any hydraulic component is removed or disconnected.
^
The torque values specified are for dry unlubricated fasteners.
^
Perform service operations on a clean bench free from all mineral oil materials