DeVille V8-4.6L VIN Y (1998)
1. Install the water crossover on the engine. Tighten the water crossover bolts to 25 Nm (18 ft. lbs.).
NOTICE: Refer to Fastener Notice in Service Precautions.
2. Install the water pump cover. Tighten the water pump cover to 10 Nm (89 inch lbs.).
3. Connect the park neutral switch.
4. Connect the EGR pipe to the water crossover.
5. Install the EGR.
6. Install the throttle body spacer.
7. Install the water pump belt.
8. Install the water pump belt tensioner (1).
