DeVille V8-4.6L VIN Y (1998)
Removing Accelerator Cable From Throttle Body
5. Hold the throttle valve open completely.
6. Push the accelerator cable (1) towards the intake manifold (2) until released.
Important: Do Not kink accelerator cable. Do Not use a screwdriver or other sharp tool for removing cable.
7. Remove the accelerator cable at the throttle body lever (3).
Installation Procedure
Notice: To prevent possible interference, flexible components (hoses, wires, conduits, etc.) must not be routed within 50 mm (2 in.) of moving
parts unless routing is positively controlled.
Important: Accelerator cable must be routed through groove in throttle body lever and seated securely.
1. Hold the throttle valve open completely.
Notice: Accelerator cable must be routed through groove in throttle body lever and seated securely.
Installing Accelerator Cable To Throttle Body
2. Push the accelerator cable (1) into the throttle body lever (2).
3. Pull accelerator cable until a snap is heard, indicating that the accelerator cable is seated.
