cadillac Workshop Repair Guides

Cadillac Workshop Service and Repair Manuals

Accelerator Cable Replacement|Page 7138 > < Accelerator Cable Replacement|Page 7136
Page 3
background image

Throttle Valve (Shown Open)

4. Throttle valve shown open.

5. Disconnect and connect the cruise control cable the same way.

6. Route the accelerator cable under brake master cylinder and through the dash panel (bulkhead).

7. Secure retainer at dash.

8. Secure cable at accelerator pedal.

Important: Check for complete throttle opening and closing positions by operating accelerator pedal. Also check for poor carpet fit under the
accelerator pedal. Throttle should operate freely without bind between full closed and wide open throttle.

9. Check for a complete throttle opening and closing positions.

Accelerator Cable Replacement|Page 7138 > < Accelerator Cable Replacement|Page 7136