DeVille V8-4.6L VIN Y (1998)
3. Shock dampener (13) from inner tie rod assembly (12) and slide back on rack.
Notice: Rack must be held during removal of inner tie rod (12) to prevent rack damage.
4. Inner tie rod assembly (12) from rack assembly as follows:
^
Place a wrench on flats of rack assembly.
^
Place another wrench on flats of inner tie rod housing.
^
Rotate inner tie rod housing counterclockwise until inner tie rod (12) separates from rack.
INSTALL OR CONNECT
Notice: Rack must be held during inner tie rod (12) installation to prevent internal gear damage.
1. Shock dampener (13) onto rack.