DeVille V8-4.6L VIN Y (1998)
Suspension Spring ( Coil / Leaf ): Service and Repair
Front Suspension
REMOVAL
^
Tools Required:
-
J 3289-20 Holding Fixture
-
J 34013-B Strut Compressor
-
J 34013-38 Alignment Rod
NOTICE: Care should be taken to avoid chipping or cracking the spring coating when handling the front suspension coil spring. Failure to
observe this notice may result in spring breakage.
IMPORTANT: Remove the strut from the vehicle in order to perform this procedure.
1. Install the strut (1) into the J34013-B.
^
Tighten the nuts (2) flush with the strut compressor.
^
Install the locking pins (4) through the strut.
2. Turn the compressor forcing screw (3) until the spring compresses slightly.
3. Use a socket (3) in order to hold the strut shaft from turning. Remove the 24 mm strut shaft nut using a 24 mm wrench (2).
