DeVille V8-4.6L VIN Y (1998)
6. Install the stabilizer link lower attachment.
7. Lower the vehicle to allow the suspension to obtain the designed trim height. The inner control arm nuts must be tightened in the designed position
to reduce wind up in the bushings.
^
Tighten the lower control arm inner nuts to 108 Nm (80 ft. lbs.).
^
Tighten the stabilizer link lower attachment to 52 Nm (38 ft. lbs.).
8. Install the wheel and tire.
^
Tighten the wheel nuts to 190 Nm (140 ft. lbs.).
IMPORTANT: The vehicle must have a rear wheel alignment performed if the inner lower control arm fasteners have been loosened.
