DeVille V8-4.6L VIN Y (1998)
7. Remove the upper mounting nut, retainer and insulator using the J 35669.
8. Compress the shock absorber by hand and remove through the upper control arm.
9. Inspect the upper and lower shock absorber insulators for cracks, tears, or other damage. Replace worn or damaged insulators.
INSTALLATION
1. Position the top of the shock absorber with the insulator attached in the suspension support.
2. Install the upper shock insulator, retainer and nut.
3. Install the shock absorber lower nut and bolt
^
Tighten the upper shock absorber nut to 75 Nm (55 ft. lbs.).
^
Tighten the lower shock absorber nut to 102 Nm (75 ft. lbs.).
NOTICE: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners
requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion
inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage
the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
