DeVille V8-4.6L VIN Y (1998)
12. Rotate the CV joint inner race 90 degrees to the centerline of the CV joint cage with the lands of the CV joint inner race (1) aligned with the
windows of the CV joint cage (2).
13. Pivot the inner race into the cage window (2) and remove the inner race (1).
14. Clean the following items thoroughly with cleaning solvent:
^
The inner and outer race assemblies
^
The CV joint cage
^
The balls
15. Remove all traces of old grease and any contaminates.
16. Dry all the parts.
ASSEMBLY PROCEDURE
^
Tools Required
-
J 35910 Earred Clamp Tool
-
J 41048 Small Swage Tool
1. Place the new small boot clamp (2) onto the small end of the joint boot (1). Slide the joint boot (1) and the small boot clamp (2) onto the halfshaft
bar.
2. Position the small end of the joint boot (1) into the joint boot groove (3) on the halfshaft bar.