DeVille V8-4.6L VIN Y (1998)
9. Remove four bolts and the bearing retainer.
10. Remove the nut from the backside of the knuckle securing the hub to knuckle.
11. Press the hub from the knuckle.
12. Remove the brake backing plate from the knuckle.
13. Press the bearing from the knuckle.
14. Remove the hub and bearing.
INSTALLATION
1. Press the bearing into the knuckle.
NOTICE: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners
requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion
inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage
the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
2. Install the backing plate and bearing retainer bolts.
^
Tighten the retainer bolts to 50 Nm (37 ft. lbs.).
3. Press the hub in the bearing.
