DeVille V8-4.9L VIN B (1995)
f.
TP sensor.
g. Fuel injectors.
h. MAT sensor.
9. Remove MAP hoses.
10. Disconnect thermostat housing attaching hoses.
11. Remove A/C hose bracket.
12. Remove distributor cap, spark plug wire protectors and position aside.
13. Mark distributor rotor installation alignment, then remove rotor.
14. Disconnect fuel lines at transmission bracket.
15. Disconnect throttle body fuel and vacuum lines.
16. Disconnect throttle body and transmission modulator line vacuum supply lines.
17. Loosen vacuum line clip at lift bracket.
18. Remove valve covers.
19. Mark pushrods with installation positions, then remove rocker arms and pushrods. Ensure pushrods are installed in original positions.
20. Remove bracket at power steering.
21. Remove right front and rear lift brackets.
22. Remove intake manifold attaching bolts, then remove.
23. Reverse procedure to install. Refer to Fig. 2, for torque specifications and tightening sequence.