cadillac Workshop Repair Guides

Cadillac Workshop Service and Repair Manuals

Customer Interest for Shifter A/T: > < Install Solenoids Wiring Harness|Page 6309
Page 1
background image

Shifter A/T: All Technical Service Bulletins
Steering Column Shift Lever - Becomes Loose

File In Section: 3 - Steering/Suspension

Bulletin No.: 63-32-01

Date: January, 1996

Subject: 
Steering Column Shift Lever Becomes Loose (Apply Loctite(R) to Splined Surface of Shift Lever Pin)

Models: 
1995 Cadillac Concours, DeVille, Eldorado, Seville

Condition

Some owners of the above listed vehicles may comment about a condition whereby the steering column shift lever becomes loose.

Correction

Following the Service Manual procedure in Section 3F, remove shift lever pivot pin. Before reinstalling shift lever pin, apply Loctite(R), or equivalent,
to the splined surface to secure in place. Refer to Figure 1, Item 1, for shift lever pin location.

Important: Apply Loctite(R), or equivalent, only to the splined surface of shift lever pin.

Warranty Information

For vehicles repaired under warranty, use: 

Labor Operation

Labor Time

K5120

Use published labor operation time.

Customer Interest for Shifter A/T: > < Install Solenoids Wiring Harness|Page 6309