DeVille V8-4.9L VIN B (1995)
3.
Remove glass run channel and check for presence of wear bar (hard glossy surface) on the glass run channel (see Figure 1, Item 3). If wear bar is
present, replace the door glass run channel and lubricate run channel with Krytox lubricant (GPL 105)* according to Step 5.
4.
If wear bar area is flocked, (Figure 1, Item 2) clean flocked area with a mild soap and water.
5.
Clean horizontal section of the glass run channel middle lip (Figure 1, Item 1) with mild soap and water. Apply a thin coat of Krytox lubricant to
"area to be coated" shown in Figure 1, Section A.
6.
Install glass run channel.
Reveal Molding
