DeVille Concours V8-4.6L VIN Y (1995)
Oil Pan Gasket: All Technical Service Bulletins
Service Procedure Steps 1 - 25
Important:
For detailed component and engine removal information, refer to Engine Replacement Procedure in the Engine Mechanical subsection of the
appropriate Service Manual or SI.
1.
Drain the engine coolant and engine oil from the engine.
2.
Remove the powertrain from the vehicle.
3.
Remove the drive belt.
4.
Remove the A/C compressor and set it aside.
5.
Remove the power steering pump and set it aside.
6.
Remove the engine from the transmission.
7.
Install the engine on an engine stand.
8.
Remove the components necessary to remove the oil pan and lower crankcase including but not limited to the following components:
^
Generator
^
Oil filter adapter
^
Crankshaft balancer
^
Engine front cover
^
Engine front cover gasket
^
Oil pump
^
Lower crankshaft sensor
9.
Rotate the engine stand with the oil pan facing up.
10.
Remove the oil pan bolts.
