cadillac Workshop Repair Guides

Cadillac Workshop Service and Repair Manuals

Inspection Procedure|Page 5360 > < Inspection Procedure|Page 5358
Page 9
background image

26.

Using the proper sized tool for the upper fuel line (J 37088-1, 3/8 in) from the J 37088-A tool set, insert the tool into the female connector and
push in, in order to release the locking tabs.

27.

Pull the upper fuel line connection apart.

28.

Using the proper sized tool for the lower fuel line (J 37088-2, 5/16 in) from the J 37088-A tool set, insert the tool into the female connector and
push in, in order to release the locking tabs.

29.

Pull the lower fuel line connection apart.

Important

Steps 30-34 MY 1995-97 Aurora ONLY)

30.

Place a shop towel below the fuel line fittings while disconnecting to avoid spillage.

31.

Squeeze the plastic retainer tabs in order to release the locking tabs.

32.

Pull the upper fuel line connection apart.

33.

Repeat Steps 31 and 32 for the lower fuel line.

34.

Remove the PCV rear hose.

Important

Inspection Procedure|Page 5360 > < Inspection Procedure|Page 5358