DeVille Concours V8-4.6L VIN Y (1995)
56.
Release the locking tabs holding the fuel rail to the intake manifold.
Notice
^
Remove the fuel rail assembly carefully in order to prevent damage to the injector electrical connector terminals and the injector spray tips.
Support the fuel rail after the fuel rail is removed in order to avoid damaging the fuel rail components.
^
Cap the fittings and plug the holes when servicing the fuel system in order to prevent dirt and other contaminants from entering open pipes
and passages.
57.
Remove the fuel rail and fuel injectors as an assembly from the intake manifold. Use the J 41801 to aid in removing any injectors stuck in the
intake manifold. Place the J 41081 between the intake manifold and the bottom of the fuel injector.
Important
Step 58 MY 1995-97 Cadillac ONLY.
58.
In order to pull the metal fuel line out from under the intake manifold adapter, using pliers collapse the left (front) metal line tube at the right (rear)
side of the intake manifold adapter. Weakening the tube will allow the left (front) metal line tube to be pulled out from under the intake manifold
adapter on the right (rear) side of the intake manifold adapter.
59.
Place the old fuel rail assembly on a clean, flat surface next to and in the same orientation as the new fuel rail assembly.
