DeVille Concours V8-4.6L VIN Y (1995)
9.
Remove the left front tire and wheel assembly.
10.
Remove the 7 push-in type retainers attaching the rear of the left front wheelhouse liner and reposition the liner as necessary to access the
transmission mount and the brace connecting the body rail and the lower cowl.
11.
Raise the vehicle fully.
12.
Support the rear of the engine frame (cradle) as necessary.
13.
Remove the four rear cradle bolts.
14.
Remove the two nuts attaching the left side transmission bracket to the body mount.
Notice
When lowering the cradle in the next step, pay close attention to the intermediate steering shaft between the steering gear and the steering
column. Do not allow the engine and cradle to be supported by the shaft.
15.
Lower the rear of the cradle as necessary.
16.
Remove the four bolt (4) attaching the brace (3) between the body rail (2) and the lower cowl sheet metal. Remove the brace.
17.
Remove the bolt attaching the fuel line retainer (2) to the lower cowl sheet metal.
18.
Remove the fuel lines from that retainer.
19.
From underneath the vehicle, release the four fuel line retainers (3) from the underbody.
