cadillac Workshop Repair Guides

Cadillac Workshop Service and Repair Manuals

Inspection Procedure|Page 5047 > < Inspection Procedure|Page 5045
Page 2
background image

7.

Install and connect the brake booster hose.

8.

Install and connect the PCV rear hose.

Important

Steps 9-10 MY 1997 Cadillac ONLY).

9.

Install and connect the PCV front hose.

10.

Install and connect the EVAP tube between the intake manifold adapter and the EVAP solenoid.

Important

Steps 11-15 MY 1995-97 Aurora ONLY.

11.

Install the fuel rail injector sight shield spacers and studs. 

Tighten the fuel rail injector sight shield studs to 12 Nm (106 lb in).

12.

Install the bolt retaining the fuel rail assembly bracket to the engine lift bracket.

Tighten the fuel rail assembly bracket bolt to 6 Nm (53 lb in).

13.

Connect the fuel injector wiring harness to the 8 fuel injectors and reinstall the fuel injector wiring harness.

14.

Connect the NEW fuel regulator hose to the fuel regulator and the vacuum port on the intake manifold.

15.

Install the PCV rear hose.

Inspection Procedure|Page 5047 > < Inspection Procedure|Page 5045