cadillac Workshop Repair Guides

Cadillac Workshop Service and Repair Manuals

WARNING MESSAGE|Page 10623 > < WARNING MESSAGE|Page 10621
Page 1
background image

Driver/Vehicle Information Display: Description and Operation
BATTERY NOT CHARGING

The IPC monitors the alternator L terminal input on IPC connector C1 terminal A9. The IPC uses the input in order to determine when to set IPC DTC
B191 1 current. The IPC uses this input when the L terminal is low and the engine runs over 600 RPM for more than 2 seconds. If the alternator is not
charging, the L terminal input is low (ground). If the alternator is charging, the L terminal input is at the ignition voltage. When DTC B191 1 is set
current, the IPC displays the message and illuminates the battery indicator.

WARNING MESSAGE|Page 10623 > < WARNING MESSAGE|Page 10621