DeVille d Elegance V8-4.6L VIN Y (1998)
1. Position the crankshaft balancer to the crankshaft.
2. Install the crankshaft balancer using the J 39344.
3. Thoroughly clean the crankshaft balancer bolt threads.
4. Apply engine oil to the threads.
NOTICE: Refer to Fastener Notice in Service Precautions.
5. Install the crankshaft balancer bolt. Tighten the crankshaft balancer bolt to 50 Nm (37 ft. lbs.).
6. The balancer bolt must be tightened an additional 120°. Make a mark on the balancer bolt flange in line with the center line of one of the balancer
legs.
7. Raise the engine cradle into position.
8. Install three cradle bolts. Tighten the bolts to 100 Nm (74 ft. lbs.).
9. Reconnect the suspension position sensors to the lower control arms.
10. Remove the J 39411.
11. Install the oil pan to transmission brace. Tighten the four bolts to 50 Nm (37 ft. lbs.).
12. Install the wheel hose splash shields.
13. Install the right front wheel.
14. Lower the vehicle.
15. Install the accessory drive belt.
