DeVille d Elegance V8-4.6L VIN Y (1998)
Compressor Clutch: Service and Repair
Clutch Coil
Clutch Coil Assembly Removal
Remove or Disconnect
1. Perform Steps 1 through 4 of "Clutch Rotor and/or Bearings" removal procedure. Mark clutch coil terminal location on compressor front
head.
2. install J 33023-A puller pilot on front head of compressor. Also install J 8433-1 puller crossbar with J 33023 puller legs as shown in the
illustration.
3. Tighten J 8433-3 forcing screw against the puller pilot to remove the clutch coil.
