DeVille d Elegance V8-4.6L VIN Y (1998)
Wheels: Service and Repair
Aluminum Wheel Recoating Procedure
ALUMINUM WHEEL RECOATING PROCEDURE
1. Clean the surface.
2. Soak the wheel with Amchem #33 or equivalent for 1-3 minutes. Rinse the wheel with water. Blow dry.
3. Soak the wheel with Amchem #1001 or equivalent for 1-3 minutes. Rinse the wheel with water. Blow dry.
CAUTION: To avoid serious personal injury when applying any two part component paint system, follow the specific precautions
provided by the paint manufacturer. Failure to follow these precautions may cause lung irritation and allergic respiratory reaction.
4. Finish the wheel with Ditzler Declear Acrylic Urethane and Ditzler Ultra-Urethane Additive, or equivalent, using the following three coats:
a. First coat: Light mist coat; let flash
b. Second coat: Light; let flash
c. Third coat: Heavy double wet coat
5. Let the finish dry for 24 hours. For faster drying, force dry the finish at 60°C (140°F) for 30 minutes. Allow the wheel to cool for 30 minutes
before mounting.
