DeVille d Elegance V8-4.6L VIN Y (1998)
Evaporative Emissions Hose: Service and Repair
Canister to Fuel Tank Hoses/Pipes
Tools Required
J34730-1A Fuel Pressure Gauge
REMOVAL PROCEDURE
CAUTION: Refer to Fuel and EVAP Pipe Installation Caution in Service Precautions.
CAUTION: Refer to Hoist Caution.
NOTICE: Do Not attempt to repair the EVAP pipes or the connecting hoses. Replace the damaged EVAP pipes or the connecting hoses are damaged. It
the nylon EVAP pipe becomes kinked and cannot be straightened, it must be replaced.
NOTICE: Properly secure the EVAP pipe in order to prevent chafing of the pipe.
1. Relieve the fuel system pressure. Refer to the Fuel Pressure Release / Service and Repair / Fuel Pressure Relief Procedure.
2. Drain the fuel tank. Refer to Fuel Tank Draining Procedure.
3. Remove the fuel tank. Refer to Fuel Tank Replacement.
4. Remove the hardware retaining the EVAP pipes.
5. Note the location of the retaining hardware for installation.
6. Remove the EVAP pipes (3) at the EVAP canister (1). Refer to Fuel Delivery and Air Induction / Fuel Line Coupler / Service and Repair for
Quick Connect Fitting(s) Service (Plastic Collar) procedures.