DeVille d Elegance V8-4.6L VIN Y (1998)
Description
16. Install the fuel rail ground wire (1) at rear cylinder head.
^
Tighten the fuel rail ground wire bolt to 11 N.m (97 lb. in).
17. Tighten the fuel rail assembly bolt to 8 N.m (71 lb. in).
18. Install the injector harness and injector electrical connectors.
19. Install the front bank spark plug wires.
20. Install the brake booster vacuum hose at intake manifold vacuum fitting.
Description
21. Install the EGR pipe at throttle body spacer.
^
Tighten the EGR pipe bolt to 28 N.m (21 lb. ft).
22. Install the MAF sensor (4) electrical connector.
23. Install the intake air duct (1) clamp (5) from the MAF sensor (4).
