DeVille d Elegance V8-4.6L VIN Y (1998)
Alignment: Service and Repair
Front Toe Adjustment
FRONT TOE ADJUSTMENT
1. Loosen the lock nut on both inner tie rods (3).
NOTICE: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners
requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion
inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage
the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
2. Set toe to specifications by turning inner tie rod (2).
^
Tighten lock nut on the inner tie rods to 63 Nm (46 ft. lbs.).
3. Reposition boots (1) after setting the toe.