DeVille d Elegance V8-4.6L VIN Y (1998)
REMOVE OR DISCONNECT
1. Pump assembly from vehicle if necessary for access.
2. Retaining ring (11) from housing (6).
3. Drive shaft (8) and ball bearing assembly (10) from housing (6).
^
When clearance exists between drive shaft shoulder and bearing inner race, measure clearance before bearing removal.
^
Bearing (10) from shaft (a).
4. Drive shaft seal (7) from pump housing assembly (6).
CLEAN
^
All parts in power steering fluid. Dry parts.
INSPECT
^
Drive shaft (8) and splines.
^
Ball bearing assembly (10).
For scoring or pitting. If noted, replace appropriate parts.
INSTALL OR CONNECT
1. Lubricate new drive shaft seal (7) with power steering fluid.
