DeVille d Elegance V8-4.6L VIN Y (1998)
Rear Knuckle: Service and Repair
Without B9Q/V4U
REMOVAL
1. Raise and support the vehicle.
2. Remove the tire and wheel assembly.
3. Remove the caliper. Suspend the caliper.
4. Remove the rotor.
5. Remove the hub and bearing assembly.
CAUTION:
^
Jackstand must be of adequate strength to support vehicle weight. Jackstand must be securely positioned or personal injury may
result
^
Place Jackstand under front of vehicle to prevent vehicle from falling from hoist.
6. Support the outboard end of the lower control arm with a screw jack in order to relieve the spring load.
7. Remove the lower shock absorber bolt.
8. Remove the stabilizer link from the control arm.
9. Remove the rear toe link outer bolt and discard. The bolt is not reusable.