DeVille d Elegance V8-4.6L VIN Y (1998)
Compressor/Pump: Service and Repair
Air Compressor
REMOVAL
1. Raise the vehicle and suitably support.
IMPORTANT: Before disconnecting any air hose or air tube, clean the components and the surrounding area to prevent dirt and other foreign
material from entering the Electronic Level Control (ELC) system.
2. Disconnect the air tube from the pressure limiter valve.
3. Remove the air tube from the air compressor bracket.
4. Remove the intake air filter from the vehicle.
5. Remove the height sensor harness from the air compressor bracket.
6. Disconnect the vehicle harness connector from the air compressor connector.
7. Remove the four nuts and the air compressor assembly from the vehicle.
8. Disconnect the pressure limiter valve air tube from the air dryer.
9. Remove the pressure limiter valve from the clip.
10. Remove the air compressor harness from the air compressor bracket.
