DeVille d Elegance V8-4.6L VIN Y (1998)
Valve Body: Service and Repair
REMOVAL PROCEDURE
1. Disconnect the battery negative cable assembly from the battery negative terminal.
CAUTION: Refer to Fastener Notice in Service Precautions.
2. Remove the bottom pan and seal, the scavenger screens, and the lip seals. Refer to Scavenge Screens and Seals Replacement.
3. Disconnect the transmission wire harness connectors from the pressure switch and the shift solenoids A and B. Use a small screwdriver.
4. Remove the manual valve linkage clip with a small screwdriver.
5. Remove the wiring harness from the retaining clips on the lower controls assembly.
6. Remove the oil transfer plate.
7. Remove the bolts and the 2 nuts. Do not remove the 5 bolts shown on the lower channel plate.
