cadillac Workshop Repair Guides

Cadillac Workshop Service and Repair Manuals

Trunk / Liftgate Latch|Service and Repair|Page 13665 > < Compartment Convenience Net Replacement - Rear|Page 13661
Page 1
background image

Trunk / Liftgate Latch: Service and Repair

Rear Compartment Lid Latch Replacement

Removal Procedure

1. Open the rear compartment lid.
2. Remove the rear compartment lid trim panel. Refer to Rear Compartment Lid Inner Panel Trim Replacement  (See: Trunk / Liftgate Interior Trim

Panel/Service and Repair/Rear Compartment Lid Inner Panel Trim Replacement) .

3. Disconnect the electrical connector (1) from the rear compartment lid latch.

4. Remove the latch release cable (1) from the rear compartment lid lock cylinder (2).
5. Remove the bolts (1) retaining the rear compartment lid latch (2) to the rear compartment lid (5).
6. Remove the rear compartment lid latch (2) from the rear compartment lid (5).

Installation Procedure

1. Install the rear compartment lid latch (2) to the rear compartment lid (5).

Notice:  Refer to Fastener Notice  in Cautions and Notices.

2. Install the retainer bolts (1) in order to retain the rear compartment lid latch (2) to the rear compartment lid (5).

Tighten the retainers (1) to 25 N.m (18 lb ft).

Trunk / Liftgate Latch|Service and Repair|Page 13665 > < Compartment Convenience Net Replacement - Rear|Page 13661