DeVille DHS V8-4.6L VIN Y (2000)
Drink Holders: Removal and Replacement
Front Seat Cup Holder Replacement
Front Seat Cup Holder Replacement
Removal Procedure
1. Remove the front center seat assembly. Refer to Front Center Seat Replacement (w/o UV8) (See: Seats/Service and Repair/Front Center Seat
Replacement (w/o UV8))Front Center Seat Replacement (UV8) (See: Seats/Service and Repair/Front Center Seat Replacement (UV8)) .
2. Turn center seat over in order to expose the bottom of the center seat assembly.
3. Remove the three fasteners (1) from the cupholder assembly.
4. Turn the center seat over in order to access the cupholder lid.
5. The center seat cupholder (1) has three clips holding it in place after the three fasteners are removed. A sharp tug on the cupholder (1) will release
the clips.
Remove the center seat cupholder (1) from the center seat assembly.
Installation Procedure
1. Install the center seat cupholder (1) to the center seat.
Push the cupholder (1) firmly into position in order to engage the cupholder retainer clips.
2. Turn the center seat over in order to expose the bottom of the center seat.