DeVille DHS V8-4.6L VIN Y (2000)
4. Partially install the rear seat back.
5. Connect the rear seat back pass through release cable (1).
6. Tie strap the pass through release cable (1) to the seat frame.
7. Install the rear seat back. Refer to Rear Seat Back Replacement (1st Design ) (See: Rear Seat Back Replacement (1st Design )) in Seats.
8. Install the release handle to the body.
Notice: Refer to Fastener Notice.
9. Install the release handle nut (1).
Tighten the nut to 9 N.m (80 lb in).
10. Install the rear trunk trim. Refer to Rear Compartment Front Trim Panel Replacement (See: Interior Moulding / Trim/Trim Panel/Service and
Repair/Rear Compartment Front Trim Panel Replacement) in Body Rear End.
