DeVille DHS V8-4.6L VIN Y (2000)
1. Fold back the centers (1) of the factory heat element material. Insert the service heat element (2), with the backing paper side up, between the trim
cover material and the factory heat element material.
2. Carefully remove the backing paper from the new heat element. Ensure the new heat element is laying flat.
3. Unfold the centers (1) of the factory heat element material.
4. Match the edges of the factory heat element material and cover the cut-lines with 3M Highland Cloth Duct Tape, P/N 6969, or equivalent. Ensure
the new and factory heat elements are laying flat.
5. Install the front seat cushion trim cover. Refer to Rear Seat Cushion Cover and Pad Replacement (Draw String) (See: Seat Cushion/Service and
Repair/Rear Seat Cushion Cover and Pad Replacement (Draw String)) .