cadillac Workshop Repair Guides

Cadillac Workshop Service and Repair Manuals

Trunk / Liftgate Switch > < Diagram Information and Instructions|Page 14893
Page 2
background image

1. Install the sunroof switch (2) and the vent switch (2) to the overhead console.

NOTE:  Refer to Fastener Notices in Service Precautions.

2. Install the screws (1) that retain the sunroof switch (2) and the vent switch (2) to the overhead console.

Tighten
Tighten the screws to 1 N.m (9 lb in).

IMPORTANT:  Care should be taken not to damage the flat wire harness.

3. Connect the electrical connectors.
4. Install the overhead console into the opening in the headliner.
5. Push in on the overhead console to engage the four retainer clips.

Trunk / Liftgate Switch > < Diagram Information and Instructions|Page 14893