DeVille DHS V8-4.6L VIN Y (2000)
1. Apply Loctite to the inner portion of the wheel speed sensor reluctor (2).
2. Insert the wheel speed sensor reluctor (2) onto the hub assembly.
3. Install the ring (1) of the J44253ABS reluctor installer onto the wheel speed sensor reluctor.
4. Insert the J 44253 ABS reluctor installer (1).
Important: Turn the J 44253 until it just touches the ring of the J 44253.
5. Turn the J 44253 ABS reluctor installer (1) to thread the wheel speed sensor reluctor.
6. Install the wheel speed sensor. Refer to Wheel Speed Sensor Replacement - Rear (w/FE7).