DeVille DHS V8-4.6L VIN Y (2000)
Installation Procedure
Notice: Refer to Fastener Notice in Service Precautions.
1. Install the brake pedal assembly onto the booster studs then install the booster stud nuts.
^
Tighten the brake pedal to booster stud nuts to 33 Nm (24 ft. lbs.)
2. Install the brake pedal nuts onto the cowl studs.
^
Tighten the cowl stud fasteners to 16 Nm (12 ft. lbs.).
3. Apply lubricant, GM P/N 9985164 or equivalent, to pushrod pin.
4. Install pushrod onto pushrod pin. Secure with spacer (1 ) and retainer (2).
