DeVille DHS V8-4.6L VIN Y (2000)
1. Compress caliper piston completely into the caliper bore.
2. Install the caliper over the brake pads into the caliper anchor bracket.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the caliper pin bolts.
^
Tighten the caliper pin bolts to 85 Nm (63 ft. lbs.).
4. Install the brake hose inlet fitting to the caliper.
^
Tighten the brake hose fitting bolt to 45 Nm (33 ft. lbs.).
5. Bleed the brake system. Refer to Hydraulic Brake System Bleeding Hydraulic Brakes.