DeVille DHS V8-4.6L VIN Y (2000)
2. Install the caliper over the brake pads into the caliper anchor bracket.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the caliper pin bolts.
^
Tighten the caliper pin bolts to 85 Nm (63 ft. lbs.).
4. Install the brake hose inlet fitting to the caliper.
^
Tighten the brake hose fitting bolt to 45 Nm (33 ft.
lbs.).
5. Bleed the brake system. Refer to Hydraulic Evoke System Bleeding Hydraulic Brakes.
6. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation in Wheels, Tires and Alignment.
7. Lower vehicle.
Brake Caliper Replacement - Front (Without J55)
Removal Procedure
