cadillac Workshop Repair Guides

Cadillac Workshop Service and Repair Manuals

Parking Brake Release Switch > < Lateral Accelerometer|Specifications|Page 9072
Page 1
background image

Lateral Accelerometer: Service and Repair

Removal Procedure

1. Turn OFF the ignition.
2. Remove the rear seat cushion. Refer to Seat Cushion Replacement - Rear.
3. Disconnect the lateral accelerometer sensor electrical connector (2).
4. Remove the 2 lateral accelerometer sensor screws (3).
5. Remove the lateral accelerometer sensor (1).

Installation Procedure

1. Install the lateral accelerometer sensor (1). 

Notice:  Refer to Fastener Notice in Service Precautions.

2. Install the 2 lateral accelerometer sensor screws (3). 

^

Tighten the 2 lateral accelerometer sensor screws to 2.4 Nm (21 inch lbs.).

3. Connect the lateral accelerometer sensor electrical connector (2).
4. Install the rear seat cushion. Refer to Seat Cushion Replacement - Rear.
5. Perform the ABS Diagnostic System Check. Refer to A Diagnostic System Check - ABS. (See: Antilock Brakes / Traction Control

Systems/Testing and Inspection/Initial Inspection and Diagnostic Overview)

Parking Brake Release Switch > < Lateral Accelerometer|Specifications|Page 9072