DeVille DHS V8-4.6L VIN Y (2000)
1.
Open the hood.
2.
Remove the four upper push-in retainers (1) that secure the front bumper fascia (2) to the front bumper impact bar.
3.
Carefully lift up the fascia and remove the self-sticking white foam insulator strip (3).
4.
Install the four upper push-in retainers (1) that secure the front bumper fascia (2) to the front bumper impact bar.
5.
Close the hood.
Warranty Information
For vehicles repaired under warranty, use table shown.
DISCLAIMER
