DeVille DHS V8-4.6L VIN Y (2000)
Cruise Control Servo Cable: Service and Repair
REMOVAL PROCEDURE
1. Open the throttle by rotating the cable cam in order to remove the tension from the cruise control cable.
2. Hold the throttle cam open, slide the cruise cable fitting (2) off of the pin (1) on the throttle cam by pushing the cable fitting towards the throttle
close direction.
3. Release the tab on the cable housing in order to remove the cable housing from the cable retainer bracket.
4. Disconnect the cruise control cable (3) from the cruise control module buckle (2).
IMPORTANT: Note cable routing and retainer position for reference during installation.
5. Remove the cable clamps holding the cruise control (1) and accelerator cables together.
6. Remove the cruise control cable (1) from the vehicle.
INSTALLATION PROCEDURE
