DeVille DHS V8-4.6L VIN Y (2000)
Radiator Cooling Fan Motor: Service and Repair
Removal Procedure
-
Tools Required
-
J37097-A Hose Clamp Remover/Installer
-
J41623-A Cooler Quick Connect Tool
Caution: An electric fan under the hood can start up even when the engine is not running and can injure you. Keep hands, clothing and tools
away from any underhood electric fan.
Caution: To help avoid personal injury or damage to the vehicle, a bent, cracked, or damaged fan blade or housing should always be
replaced.
1. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnect/Connect Procedure.
2. Remove the upper radiator support. Refer to Tie Bar Replacement - Upper.
3. Drain the cooling system. Refer to Draining and Filling Cooling System.
4. Remove the air deflector. Refer to Air Deflector Replacement - Front.
5. Remove the engine oil cooler line retaining clip and bolt from the fan shroud.
6. Lower the vehicle.
7. Position the J37097-A (3) to the clamp in order to remove the inlet radiator hose (2) from the radiator (1).
