DeVille DHS V8-4.6L VIN Y (2000)
Radiator Hose: Service and Repair
Radiator Hose Replacement - Inlet
Remove Procedure
^
Tools Required
-
J37097-A Hose Clamp Remover/Installer
-
J38185 Hose Clamp Pliers
1. Partially drain the cooling system. Refer to Draining and Filling Cooling System.
2. Remove the upper filler panel. Refer to Filler Panel Replacement - Upper.
3. Position the J37097-A (3) to the clamp in order to remove the inlet radiator hose (2) from the radiator (1).
4. Position the J38185 (2) to the clamp in order to remove the inlet radiator hose (1) from the engine.